How Long Do Truck Tires Last?

How Long Should Truck Tires Last?

Generally speaking, the life of truck tires is 3-6 years. This is related to factors such as tire type, tire quality, road conditions, and how much the tire is used. However, if the tires are found to be extremely worn during the daily inspection of the truck, for safety reasons, the tires should be replaced immediately even if they have only been used for one year.

How Many Miles Should Tires Last on a Truck?

Truck tires last 60,000 to 120,000 miles (about 100,000-200,000 kilometers). However, it should be noted that in the case of severe wear, even if the mileage of the tire has not been reached, it must be replaced.

When to Replace Truck Tires

• Severe wear: When the depth of the tire tread wears below 1.6 mm, the tire needs to be replaced. Because when the tires are severely worn, the grip and friction of the tires will be reduced, which will affect the safe driving of the truck and increase the risk of tire blowouts.
• Tire aging: Tires have a limited lifespan, and even if they are not worn out, they will lose their elasticity and toughness due to aging. Tires also need to be replaced after they have reached the end of their useful life or reached a specified mileage.
• Tire damage: If the tires have cracks, bulges and other abnormal conditions, they need to be replaced immediately, otherwise it will affect the driving safety of the vehicle.

How to Extend the Life of Your Truck Tires?

Check Tire Pressure Regularly:

The air pressure of truck tires is very important to driving safety. Check your tire pressure regularly to make sure your tires are inflated to the manufacturer’s specifications. Here are suggestions for checking tire pressure:

• Inspection frequency: It is recommended to check the tire pressure every two weeks or before each driving.
• Correct tire pressure: The standard tire pressure of trucks is generally 830Kpa-930Kpa. The standard tire pressure will be marked in the truck owner’s manual or on the surface of the truck tires.Or You Can Contact Us
• Conditions when checking tire pressure: Tire pressure should be tested when the tires are cold, as the temperature of the tires will increase after the truck has been driven for a period of time, which will lead to inaccurate test results.
• Adjust tire pressure: If tire pressure is too low or too high, it can negatively affect the performance and safety of your vehicle. So please adjust it to the correct tire pressure value.

Shacman Tractor Truck Tires

Periodically Change the Tire Position:

The uneven wear of truck tires will shorten the life of tires. You can regularly change the position of tires to make tires wear evenly. However, it should be noted that different types of trucks and different brands of tires may have different exchange rules. It needs to be operated according to the recommendations of the vehicle manufacturer or the instructions of the tire manufacturer. In addition, we should also pay attention to the wear degree of the tire. If a tire has been seriously worn, it should not be used in other places, but should be replaced in time.

Regularly Check Tire Wear:

Especially the degree of wear of the tire pattern and whether there are cracks and bulges on the tire surface. If problems are found, replace the tires in time:

• Wear depth: The main manifestation of truck tire wear is wear depth, which is generally measured by dividing rule or professional tools. Experienced maintenance personnel or old drivers can also judge the wear degree of tire tread through observation. The deeper the tire wear, the worse the grip of the tire, the worse the driving safety, and it will also increase the fuel consumption of the truck.
• Tire tread wear uniformity: If tire tread wear is uneven, it may be caused by problems such as tire asymmetry, incorrect tire pressure, wheel deflection, etc. Uneven tire wear will cause vibrations when driving at high speeds, posing a threat to driving safety.
• Whether there are cracks: Cracks on the tire surface will affect the overall strength of the tire, causing problems such as tire cracking and air leakage, thus endangering driving safety.

Sinotruk Tractor Truck Tires

Avoid Overloading:

Overloading truck tires can cause tire deformation, increased wear and even blowouts. It is therefore recommended to avoid excessive loads and to observe the maximum loads specified by the manufacturer.

Avoid Sudden Braking and Rapid Acceleration:

Frequent sudden braking and rapid acceleration will lead to increased friction between the tires and the road. This increases tire temperature, which accelerates tire wear and age. In addition, sudden braking will also cause the rubber material on the surface of the tire to be stripped, which will reduce the grip and life of the tire.

Clean Your Tires Regularly:

The mud, sand and dust on the surface of the tire will reduce the grip and life of the tire, so it is recommended to wash the tire regularly.

How to Clean Truck Tires:

1. Rinse the surface of the tire with a high-pressure water gun or a water hose to wash away dirt, sand, stones and other sundries on the surface.
2. Spray the tire cleaner on the tire surface, especially the deep part of the tire pattern, and wipe the tire surface with a brush or sponge.
3. Rinse the surface of the tire again with a high-pressure water gun or a water hose to wash away the detergent and sundries.
4. Finally, dry the surface of the tire with a towel to ensure that the tire is dry.

It is recommended to clean the truck tires every 3 months or so, and the specific time interval can also be adjusted appropriately according to the use environment and tire conditions. In addition, in special cases, such as when a truck passes through a muddy road, it is also necessary to clean the tires in time.

Regular Tire Balance and Alignment Adjustments:

Unbalanced tires and incorrect wheel alignment can lead to increased tire wear and an unstable ride, so regular tire balance and alignment adjustments are recommended.

• Tire Balancing: Truck tire balancing refers to maintaining the stability and balance of the tires at high speeds by adding or removing weights on the tires. Generally, tires need to be balanced after replacement or repair. When adjusting the tire balance, it is necessary to install the truck tires on a professional tire balancer, let the machine automatically detect the balance of the tires and add balance blocks, and finally adjust to a balanced state.
• Tire alignment adjustment: Truck tire alignment adjustment refers to adjusting the angle of the front and rear wheels of the truck to ensure the straight-line stability of the vehicle and uniform tire wear. Inaccurate tire alignment may cause problems such as uneven tire wear and unstable direction when driving. When adjusting the tire alignment, it is necessary to use a professional tire alignment instrument to detect and adjust the angle and position of the truck tires. The specific adjustment method and angle need to be adjusted appropriately according to factors such as the model, manufacturer and usage of the truck.

It should be noted that tire balance and positioning adjustments need to be carried out in professional vehicle maintenance shops or professional tire maintenance centers. Regular tire balance and alignment adjustments can improve tire life and keep your truck safe.

10.00R20 Mixed Pattern Tire

Summary

The service life of truck tires is affected by many factors. Drivers should always check the condition of truck tires during daily driving, and replace them immediately when they find cracks or bulges. And the service life of tires can be extended by regular maintenance of tires, maintaining correct tire pressure, avoiding sudden acceleration, sudden braking, and avoiding overloading.
By following these practical tips, drivers and haulage companies can maximize the value of their truck tire investment.