How to unload the side dump semi trailer?

How to unload the side dump semi trailer

How to unload the side dump semi trailer?Draw unloading is an engineering vehicle. The principle is to drive the hydraulic mechanism through the engine, which drives the lifting mechanism to complete the tilt to achieve the purpose of unloading. After the unloading is completed, the reset time and labor force will be greatly saved, the transportation cycle is shortened, unload the side dump semi trailer the production efficiency is improved. Applications in areas such as mining, water conservancy construction, and road building are widely used.

The dump truck can be divided into rear turning and side flipping from the lifting method. Today we will focus on the side turning semi trailer.

In fact, most of the previous dump trucks are rear turning, but rear turning semi trailers have high requirements on the height of the raising top rod. Generally, unload the side dump semi trailer the height of the top rod is affected by the length of the carriage. The longer the pole length. However, the design of the top rod adopts a rising design, the more detailed it is, so it is very unfavorable to the horizontal stability of the lifting.

In this case, the biggest advantage of the sideline emi trailer was came out. Its biggest advantage is that the height of the raising top rod is small, unload the side dump semi trailer and it is less than half the height of the rear turbine. The top rod of the sideways semi trailer is generally distributed at the bottom of the cargo compartment, unload the side dump semi trailer with great lifts, and the horizontal stability is also improved. Especially for semi trailers with long cargo compartment, the side turning type is more suitable.

In addition, the design of the side -by -side truck is generally installed with a shift lever, which can help reduce the rollover to a certain extent, unload the side dump semi trailer but it cannot be completely avoided. It also needs to be strictly standardized.

Of course, unload the side dump semi trailer ,there will be disadvantages with advantages, and the disadvantages of sidewalk semi trailers are also obvious. It is mainly to have higher requirements for unloading venues, and it is easy to bury tires and unloading goods when unloading. unload the side dump semi trailer ,So, is there any skills to unload the side of the side trailer?

The unloading site should be flat. This is the first problem that the owner should pay attention to. You must choose the place where the ground is flat, especially the slopes on the left and right sides. If the center of gravity shifts after the rising cargo box rises, unload the side dump semi trailer ,it is very easy to cause a rollover.

The ground to unload is strong. The general weight of dump trucks is relatively large. If the ground is relatively soft, it will easily cause wheel sinking, body shaking or trailer rollover.

The fence of the unloading site is converted into a baffle. unload the side dump semi trailer ,This is also a way to prevent buried tires provided by the owner. The fence next to the tire is converted into a baffle. Pay attention to the height of the ground, unload the side dump semi trailer ,so that it is not easy to bury the tire when unloading.

Do not rose all at one time. It is recommended that the owner pay more attention to the observation during the unloading process. A section of the top rod is raised to observe the trailer.