How to unload the dump truck？

the ways to unload the dump truck

How to unload the dump truck？The rear dump truck is suitable for the transportation of bulk granular cargo such as coal, ore, construction materials, etc., which can unload the dump truck effectively improve the efficiency of loading, unloading and transportation. The whole vehicle is optimized and designed with advanced computer-aided design software. According to the requirements of the vehicle bearing quality, the frame is subjected to finite element analysis, unload the dump truck scientific design, reasonable load distribution, and the same load can effectively reduce the dead weight of the product.

The rear tipping dump truck is mainly composed of a hydraulic dumping mechanism, a carriage, a frame and its accessories; the loading carriage can automatically tip over a certain angle for unloading, which unload the dump truck greatly saves unloading time and labor; shortens the transportation period, improves production efficiency, and reduces transportation costs , is a commonly used special transport vehicle.

The rear tipping dump trucks can be divided into two categories according to their purposes: the first category is heavy duty and super heavy dump trailers for off highway transportation.

The other type of light, medium and large ordinary dump trailers for road transportation are mainly unload the dump truck responsible for the transportation of loose goods such as sand, soil, and coal, and are usually used in conjunction with loaders.

Dump truck is a kind of engineering vehicle. Its principle is to drive the hydraulic mechanism through the engine to drive the lifting mechanism to complete the inclination to achieve the purpose of unloading. After unloading, it resets, which unload the dump truck greatly saves unloading time and labor, shortens the transportation period, and improves production efficiency. It is widely used in mining unload the dump truck, water conservancy construction, road construction and other fields. So how to unload the dump truck? Below I will give you a brief introduction.

it is a Sinotruk gearbox, no need to hang up), press the power take off switch and unload the dump truck the idle switch at the same time. (Some models only have one of these switches, just press one). The lift switch on the lower left side of the seat moves up to unload the dump truck the raised position. Slowly release the clutch pedal and the large box will automatically lift. After the tipping of the back dump truck is completed, step on the clutch pedal, take it to the neutral position, turn off the power take off switch, and release the clutch pedal. At this time, if you want to drop the ceiling, just move the lift switch on the lower left side of the seat down to the ceiling drop position.

When starting the dump truck, don’t be too violent, pay attention to the dead corners when driving, don’t force the gear shift (the combination of speed and speed), when the vehicle is running, the chassis power unload the dump truck take off must stop, and the manual operation valve must be in the middle stop position , It is strictly forbidden to operate the manual control valve to the lifting and lowering positions.

Do not suddenly push the lift handle to the “lowering position” in the middle of full-load lifting. If this operation is wrong, the carriage will suddenly rush down, which will bring great impact to the frame and even cause an accident. Therefore, the above-mentioned operations should be avoided as much as possible. If there are special circumstances, it must be operated carefully, unload the dump truck the descent speed should be slowed down as much as possible, and the carriage must not be suddenly dropped to the bottom.