Side dump trailer sent to Burkina Faso

Side dump trailer sent to Burkina Faso

We have side dump trailer sent to Burkina Faso, I will introduce the relevant knowledge of side dmp trailer to you.

side dump trailer account for a relatively high market share in the domestic semi trailer. Its cars can automatically turn over a certain angle when unloading, so it can greatly improve the efficiency of unloading and shorten the transportation cycle. The principle is to drive the hydraulic mechanism through the engine, which drives the lift mechanism to complete the tilt to achieve the purpose of unloading, and reset after the unloading is completed.

In the side dump trailer, the application rate of the Skeleton high box side flip the car unloading is relatively high. Listening to the name, the impression of people seems to be more complicated, “skeleton”, “container”, Side dump trailer and “sideways”. In fact, after reading the pictures, I know that this model is still more in the transportation of loose goods such as sand, soil, coal, sand, and grain:

The semi trailer “skeleton” generally refers to the frame welded from the longitudinal beam, beam and front and rear beams. The shape is similar to the low tablet semi trailer,Side dump trailer but the steel plate is changed to the frame, which can be used to install a container.

Unlike the side dump trailer, the body structure does not include containers. According to the GB1589 regulations, the length limit of the skeleton semi trailer is 13.95 meters, but the length limit of the compartment semi trailer is 13.75 meters.

Compared with the rear turning dumping method, the height of the side roller downtime is smaller and the horizontal stability is stronger.

This is because the hydraulic top of the rear turning side dump trailer is generally installed at the front end of the frame or between the frame. The rods are generally rising design, Side dump trailer and the smaller the outer diameter at the top, the less conducive to stability. Although it is said that the requirements for the height of the centered hydraulic top are less, the length of the car can also have a certain impact on the stability of the lift.

The anti-lying side dump trailer, the liquid pressure top is evenly distributed on the side of the frame, the raising intensity is large, and it is not affected by the length of the box. Half of height.

However, the side turningded Side dump trailer has higher requirements for unloading venues, large, wide, and flat at the venueSide dump trailer , and it is prone to buried or unloading when unloading.

Key points for the technical point of side turning side dump trailer unloading:

The venue of the unloading site should be flat and strong. This is the first problem that the owner should pay attention to. There is no slope on the left and right sides. If the center of gravity is shifted after the rising cargo of the car, it is very likely to cause the rollover phenomenon. In addition, the ground is relatively soft, which can easily cause wheel sinking, body shaking, or rolling in the trailer.

The fence of the unloading site is converted into a baffle. This is also a way to prevent buried tires provided by the owner. The guardrail next to the tire is converted into a baffle. Pay attention to the height of the ground, so that it is not easy to bury the tire when unloading.

Do not rose all at one time. It is recommended to raise a section to observe.

Pay attention to observation during the unloading process. If the tire sinks and the body is tilted, the loading and unloading should be stopped immediately. It is best to arrange another person to help observe outside the trailer.