How to rise to the top of the shacman dump?
rise to the top of the shacman dump
rise to the top of the shacman dump combine the force to take the force, then hung 2 gears, and move the hand control valve from the parking station to the lifting station.
During the lifting process, you can move the handle at any time to stop the position, so that the large box is stopped at any position. After the large box is to the limit position, the tank bias to touch the limit valve automatically stops lift.
Finally, the handle is moved to the falling station to achieve the whereabouts of the large box; without repeated lifting, the force can be stopped to stop the work of the gear pump.
The procedures for operating dump trucks are not complicated. Generally, rise to the top of the shacman dump it is a combination of force extraction. The box stops at any position. After the large box is to the limit position, the tank partial rotation to touch the limit valve will automatically stop lifting. Finally, move the handle to the falling station to achieve the whereabouts of the large box. Stop the gear pump to work.
Large cars such as dump trucks are a very important part of my country’s economic life pulse. The role of transporting goods is equivalent to red blood cells that transport oxygen in the human blood vessels. Therefore, rise to the top of the shacman dump large vehicles on the road must pay attention to safety. The essential device, the role of the seat belt is that when an emergency accident occurs, protect the people in the car from smaller damage and reduce the impact. When we were thrown out by external forces, it was like one hand, and the personnel pressed the personnel on the seat in time. However, with the increase of cars and the skill of driving technology, rise to the top of the shacman dump the awareness of people’s security belts has gradually weakened. As a result, an accident that increased due to a seat belt increased year by year. Driving a car is responsible for his life, and it is also responsible for others.
In many mining areas, construction sites, and rural areas, a dump truck can often be seen “running” to carry out the loading and unloading and transportation of earthwork, sand, and loose materials. Draw trucks are a special vehicle that can unload the goods by hydraulic or mechanical lifting through hydraulic or mechanical lifting. Because of its simple and practical, convenient and convenient characteristics, rise to the top of the shacman dump it is widely used in many regions. The principle of dump trucks on top unloading is to drive the hydraulic pump through the transmission and force device, and the high -pressure oil through the distribution valve and the oil pipe to enter the lift hydraulic cylinder, and promote the piston rod to make the compartment turn over.
Before the operation, rise to the top of the shacman dump you must hung the vehicle into the empty gear to avoid unnecessary accidents. Next: press the force switch to increase the device to reach the specified stacking point. , Open the force device and lift the switch.The power device refers to the force to take the force, rise to the top of the shacman dump which is an important device to realize the divergence function. Let ’s take a look at the steps of the operation of the operating force to achieve the steps and related precautions.
Step on the clutch pedal;
Hanging low -speed gear (if it is the 8th gearbox of Shaanxi Automobile, hang 1 ~ 4; it is 10 gearboxes, hanging 1 ~ 5 gear; Heavy Automobile gearbox, no need to hang the gear);
Press the force switch;
Wall the lift switch to the rising position;
Slowly release the clutch pedal, the carriage will automatically raise;